That is indeed the case, I'm using Sonar 6 Studio. Maybe I'm going to upgrade.
Thanks for answering.

Thanks for clearing this up! I'm indeed using Sonar 6 Studio, and have been considering upgrading to Sonar 8 Studio, so maybe I'm going to do that anyway.

Feature request for Sonar plugin: it would be great if the encoder resolution for the Frequency in EQ mode was adjusted to smaller steps (1 or 2 Hz) for frequencies below 500 Hz when in fine mode.

When controlling the Sonitus EQ plugin, the current resolution in fine mode seems to be around 165 Hz per step, which is unworkable when trying to make adjustments in the lower frequency range. Also when flipping control to the fader making fine adjustments in the lower frequency range is still difficult.

I can't find out if this behaviour is the same for the build-in channel EQ in Sonar, as I currently cannot control the build-in channel EQ parameters in Sonar 6.2.1 (see the "Alpha wont control Sonar 6 EQ" topic about this problem); I presume it is, as the build-in channel EQ is based on the original Sonitus EQ plugin. Or am I wrong on this?

Please look into this request. Although the Alphatrack-Sonar documentation notes that in with some plugins not all parameters respond well to encoder adjustment due to probable interface limitations, I would very much like to see a solution for this (in my opinion) important function (unless the build-in channel EQ does respond better to fine adjustments, but as I mentioned, I can't find that out).

Strange issue with Send Enable and Pre/Post switches in the Send mode in Cakewalk Sonar 6: the Alphatrack displays the correct values and seems to change the settings in Sonar, but you can not see the options being changed in Sonar itself (neither in track view or console view). In other words: you can actually hear the Send being switched on/off or pre/post, but this does not show up in Sonar, the state of the switches stays unaffected (the other way around works ok: changing in Sonar shows up correctly on the Alpha). Changes are not saved either when on/off or pre/post is changed using the Alpha.

This is only for the Send Enable and Pre/Post settings. Send #, Level and Pan are working correctly (and show up in Sonar).

Windows XP 32 Pro
Cakewalk Sonar 6.2.1
Alphatrack windows driver v1.2
Alphatrack Sonar plugin v1.04

I'm experiencing the same problem on the track EQ in Sonar 6, the Alphatrack is unable to control the Frequence/Gain/Q parameters in the EQ mode (but it displays its correct values). When flipping encoder to the fader, it moves to the down position (as if its value would be 0). Band select/Filter Type/Band Enable are working fine.

Windows XP Pro
Cakewalk Sonar v6.2.1
Alphatrack windows driver v1.2
Alphatrack Sonar plugin v1.04